Electronic Preset counters: For counting and controlling industrial processes.
-
BVA Preset Counter for counting production quantities.
- 5 Large Digits & Visible Set Point Number-Counts Up With Output at Preset
- 5 Amp, Form C Switch
- The BVA has 2 registers. One shows the set point continuously.
- The other totalizes the incoming pulses.
- BVA counter pdf
-
Omni Preset Counter for use when control is need without display.
- AC or DC Powered & Low Cost-2, 4 or 6 Digits -10 kHz Maximum Input
- Relay or Solid State Outputs
- This instrument is designed for applications where visual display
- is not required and low cost/small size is important.
- Omni counter pdf
-
- Positrol Preset Counter used where 2 alarm set points are needed.
- 2 Control Set Points with Selectable Start Point-
- 5 Digit Floating Point Decimal Scaling Factor-Separate Up and Down Inputs
- Quadrature & Pulse Input with Up/down Control
- NEMA 4X / IP65 Sealed Front Panel , 6 digits of bright, 7-segment LED displays.
- Positrol counter pdf
Kaltrol Preset Counters for batch, coil winding and control.- Main & Subsidiary 6 Digit, LCD Displays Counter/Timer and Preset Values
- Add or Subtract Count/Time Control- AC or DC Operation- Batch counting.,
- NEMA 4X / IP65 Sealed Front Panel-10 Year Data Memory (Battery)
- Kaltrol counter pdf
-
Intellect Preset Counter where 2 set points are assigned to rate or total.
- High/Low Scaling-Integrating totalizer/rate meter accepts analog signal inputs.
- 2 Set Points Assignable To Rate Or Total
- 0-5V, 0-10V, 1-5V, 4-20mA or 0-20mA Analog Input
- NEMA 4X/IP 65 Front Panel- RS422/232 Serial Communications
- Intellect counter pdf
Minitrol Preset Counter for any rate, total or blending application.
- Separate Scaling Factors For A & B Inputs - Display Rate & Total
- RS422/RS232 Serial Communication - NEMA 4X / IP65 Front Panel
- 6 digit totalizer / rate meter with two level, 5 digit preset alarm control .
- Minitrol counter pdf
